Cartridge Filtration Package – EcoPro (CL200 / SQ Pro 1100) + Salt Chlorinator
Product code: 17010050
Free Shipping Australia-wide
Includes GST. Free shipping is applied automatically at checkout.
In stock, dispatched from Brisbane
- Australian owned, Brisbane based
- Each component keeps its own warranty
- Free Shipping Australia-wide
- Local support, Mon–Fri
Overview
Poolrite Cartridge Filtration Package – EcoPro
CL200 Cartridge Filter, SQ Pro 1100 Variable Speed Pump and Salt & Mineral Chlorinator
A matched filtration package for salt and mineral pools, built around the Poolrite C Series CL200 cartridge filter. The filter, pump and chlorinator are sized to work together, and a spare CL200 cartridge is included so one can be in the filter while the other is being cleaned.
The EcoPro package uses the Poolrite SQ Pro 1100 variable speed pump. Run everyday filtration at a low speed and step up only for backwashing, cleaners or water features. Running slower for longer moves the same water for a fraction of the energy of a single-speed pump.
What's in the Package
| Component | Model | Code |
|---|---|---|
| Filter | C Series CL200 cartridge filter | 11070024 |
| Pump | SQ Pro 1100 variable speed pump | 11030036 |
| Chlorinator | Madimack inverCHLOR 20 salt & mineral chlorinator (20 g/hr) | INVCHLORAU20 |
| Spare cartridge | C Series CL200 replacement cartridge | 11080034 |
Why These Components Work Together
- The CL200 has 200 sq ft of filter area and a maximum flow of 28,200 L/hr (470 L/min), which suits the flow of the SQ Pro 1100.
- The SQ Pro speed can be set to suit the pool: use a low speed for daily filtration and step up when you need more flow.
- The chlorinator cell fits in the return line after the filter, so it treats filtered water.
- Everything is bought together from Poolrite, with one point of contact for help.
Key Features
- Poolrite C Series CL200 cartridge filter with 200 sq ft of filter area
- Fine filtration down to 10 microns with a pleated, reusable polyester cartridge
- Spare CL200 cartridge included
- Quick-access locking ring, air-release valve and pressure gauge
- No backwashing: clean the cartridge with a hose instead of sending water to waste
- SQ Pro 1100 variable speed pump: 1.5 HP, 1,000–2,850 RPM, 5.5-star energy rating
- Brushless DC motor with on-motor touch controls, RPM display and low, medium and high presets
- Madimack inverCHLOR 20 salt & mineral chlorinator: 20 g/hr of chlorine at 3,000 ppm salt, and runs on salt levels from 1,200 to 6,000 ppm
- IP65-rated chlorinator controller with a built-in pump outlet and timer; cell rated for 80–400 L/min
- Suits salt and mineral pools
Filtration Package Range
| Package | Filter | Pump | Pump type | Filter max. flow |
|---|---|---|---|---|
| S-5000 Essential | S-5000 | SQJ-750 | Single speed | 220 L/min |
| S-6000 Essential | S-6000 | SQI-500 | Single speed | 300 L/min |
| S-8000 Essential | S-8000 | SQI-600 | Single speed | 450 L/min |
| S-8000 EcoPro | S-8000 | SQ Pro 1100 | Variable speed | 450 L/min |
| CL200 Essential | CL200 | SQI-600 | Single speed | 470 L/min |
| CL200 EcoPro (this package) | CL200 | SQ Pro 1100 | Variable speed | 470 L/min |
Choosing the Right Package
Work out your pool’s volume in litres with our Pool Volume Calculator, then compare the range above or talk to a Poolrite dealer about the right package for your pool and plumbing.
Installation
- Install the filter after the pump and the chlorinator cell in the return line after the filter (and after any heater).
- Install the pump within 12 m of the pool and within 1 m above or below the water level.
- Use 50 mm (or larger) suction pipe and 40 mm (or larger) discharge pipe for the SQ Pro.
- The chlorinator's pump outlet is rated to 9 A. The SQ Pro 1100 can draw up to 9.65 A, so connect the pump to its own weatherproof outlet, not the chlorinator.
- Install the chlorinator cell horizontally, with at least 200 mm of straight pipe before and after it, and mount the controller within 1 m of the filter equipment.
- Connect to a weatherproof outlet protected by an RCD rated 30 mA or less. Electrical work must be done by a licensed electrician.
Downloads 4
Warranty
- Each component keeps its own warranty
- Filter: 3-year tank warranty (replacement on tank only), 1 year on lid components
- Pump: SQ Pro cover as set out in the warranty terms
- Chlorinator: 4 years on the controller and cell (or 10,000 hours, whichever comes first), backed by Madimack
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. Read the warranty terms · Register your product
Delivery
- We deliver Australia-wide. Most in-stock orders leave our Brisbane warehouse within 1–2 business days.
- Smaller items travel by Australia Post. Pumps, filters and bulky items go by StarTrack road freight.
- You'll get a tracking number by email when your order ships.
- Free Shipping Australia-wide on this package, shown as "Free Shipping" at checkout. Please use a street address: we can't deliver to PO Boxes or Parcel Lockers.
