Tools
Mineral Dose Calculator
Find out how many 10 kg bags of Revive minerals your pool needs, whether it is a new fill or a top-up, and add them to your cart in one go.
How to add Revive minerals
- Break it upBreak up any lumps in the bag before it goes in the pool. If the bag has caked, leave it sealed in the sun to warm first.
- Spread it aroundSpread the minerals across the pool, not all in one spot. Never add them through the skimmer.
- Keep the water movingRun the pump and brush the minerals around until they've dissolved. Don't let them sit in one spot: concentrated minerals can stain or mark the pool surface.
- Circulate and testKeep the pump running for 12 hours to mix it through, then check the level and top up if needed.
Some foaming, floating material and cloudiness while it dissolves is normal. Wear gloves and eye protection, avoid breathing in the dust, and read the label and Safety Data Sheet before use.
Bags for a new fill
10 kg bags to take a fresh pool from 0 ppm to each level.
| Pool size | 3,000 ppm | 3,500 ppm | 4,000 ppm |
|---|
How is this worked out?
We use the Revive dosing guide: about 1.31 kg of minerals for every 1,000 litres of water, for each 1,000 ppm you want to raise the level. Mineral blends need a little more product than plain pool salt to reach the same reading. The Pool Volume Calculator uses the same figures.
For example, a new 45,000 L pool taken to 4,000 ppm needs 24 bags, and the same pool topped up from 1,000 to 4,000 ppm needs 18 bags. Results are rounded to the nearest whole bag.
Always follow your chlorinator's recommended level. These are estimates only: rain, splash-out and backwashing all change your level over time. Prices are the current online prices and freight is calculated at checkout. If you're unsure, a Poolrite dealer can help. See our terms.