Pool care guide

Single-Speed vs Variable-Speed Pool Pumps: Is the Upgrade Worth It?

How much can a variable-speed pool pump save? Compare energy ratings, running costs and payback.

By Poolrite 4 min read

A single-speed pool pump beside a variable-speed pool pump on paving next to a backyard pool

A variable speed pool pump can cut your pool's electricity use dramatically. But if your single-speed pump still works well, is it worth replacing now? Here's how to decide.

Why variable speed uses so much less power

A pump's power draw drops steeply as it slows down. Running at half speed for longer uses a fraction of the energy of running flat out for a shorter time, while moving the same total water. A variable-speed pump filters slowly and quietly most of the day, then speeds up only for jobs that need it, such as vacuuming, backwashing or spa jets.

You can see the difference on the Australian Government's Energy Rating Label, which pool pumps must carry. It shows a star rating and a standard estimate of yearly energy use.

Poolrite pump Type Energy rating Rated energy use (kWh/year)
SQ Junior 750 Single speed, 1.0 hp 1 star 1,329
Enduro EP-750 Single speed, 1.0 hp 1 star 1,357
Enduro EP-1100 Single speed, 1.5 hp 1 star 1,573
SQ Pro 750 Variable speed, 1.0 hp 6 stars 390
SQ Pro 1100 Variable speed, 1.5 hp 5.5 stars 448

On these rated figures, the SQ Pro 750 uses around 70% less energy than a comparable single-speed pump. At 30c per kWh, the gap between an EP-750 and an SQ Pro 750 is about 967 kWh, or roughly $290 a year. Your own saving depends on your run hours, speed settings and electricity tariff.

Your pump has failed: go variable speed

If you need a new pump anyway, the decision is easy. Compare the extra cost of a variable-speed pump over a single-speed replacement with the yearly saving. Because you're only paying the difference, payback is often just a few years, and you get a quieter pump with more control.

If you're replacing a Poolrite SQI or SQ Junior, the SQ Pro is designed as a drop-in replacement with no re-plumbing. See the full Poolrite pool pump range, or go straight to the SQ Pro 1.0 hp or SQ Pro 1.5 hp.

Your pump still works: run the numbers

Upgrading a healthy pump means paying the full installed price up front. Work it out like this:

  1. Current use: your pump's input power (kW, from the label) × hours per day × days per year.
  2. Proposed use: the variable-speed pump's power at the speeds you'll use × hours. Remember it may run longer at low speed, plus short high-speed periods.
  3. Saving: the difference in kWh × your electricity rate.
  4. Payback: full installed cost ÷ yearly saving.

An early upgrade makes most sense when:

  • your pump runs long hours for much of the year
  • your pump is older, noisy or starting to need repairs
  • you're adding a heater, cleaner or water feature that benefits from speed control
  • you want a much quieter backyard

It may be better to wait if your pump is reliable, runs short or seasonal hours, and no major repair is due. Recheck the numbers when a big repair comes up.

Set it up properly

A variable-speed pump only saves money if it's set up well. The lowest speed still needs to:

  • keep the skimmer drawing surface debris
  • give your chlorinator enough flow to switch on and produce enough chlorine
  • meet any heater or heat pump's minimum flow

Never bypass a chlorinator or heater flow switch. Your installer or Poolrite dealer can help set the speeds and timer.

FAQs

Can a variable-speed pump save money even if it runs longer each day?
Yes. Running slower for longer still uses much less energy than running fast for fewer hours.

Does rooftop solar make an upgrade less worthwhile?
It can reduce the saving if the pump already runs on free solar power. But a variable-speed pump leaves more solar to export or use elsewhere, and still saves at night or on cloudy days.

Can I convert my single-speed pump to variable speed?
Not simply. The motor and controls are different. Replacing the pump is the practical option.

Is a variable-speed pump quieter?
Yes. At low filtering speeds it's much quieter than a single-speed pump.

Need a hand?

Our team can help with Poolrite pumps, filters, skimmers and parts. Find a Poolrite dealer near you, or contact us on (07) 3155 6531, Monday to Friday.

← Back to Pool Care Guides